- ✿The clock doetn't make a loud ticking sound,the numerals have a mirror effect,they are foam pads with a sticky side. peel off the backing on the number, stick it on the foam pad, peel the backing off the foam pad stick on the wall.
- ✿The modern DIY clock is often in some interior design magazine,It's quite light in weight, meaning that hanging them is easy and you don't necessarily need to worry about getting a nail in the right position or that they might fall off.
- ✿The clock has made your room look extremely modern. Easy to assemble,but you still It does require some patience and time !You basically fit the clock to the wall, level it out, place a measurement tool on the mechanism, move it around marking the wall at whatever distance you want.
- ✿If you want to remove the residue left on the wall from the roman numeral decal, you can use a hairdryer to soften the glue then wipe it off .If you think the nut sent will not screw tight enough,you should the hour hand goes on first and pushes tight over a rubber washer. The minute hand screws up with the screw.
- ✿The wall clock hands measure a whopping 31.5cm/12.4" for the minute hand and 27cm/10.6" for the hour hand. It's including a guide shows the angles of all the digits on the clock,the addition of the guide not only means you'll be able to place your numbers in a pixel perfect positioning ,but it also allows you to choose just how big or small you want the clock while still maintaining accuracy for the placement of everything.
